Change Point Estimation of the Stationary State in Auto Regressive Moving Average Models, Using Maximum Likelihood Estimation and Singular Value Decomposition-based Filtering

Authors

1 Department of Industrial Engineering and Management Systems, Amirkabir University of Technology, Tehran, Iran

2 Department of Industrial Engineering, College of Engineering, West Tehran Branch, Islamic Azad University, Tehran, Iran

Abstract

In this paper, for the first time, the subject of change point estimation has been utilized in the stationary state of auto regressive moving average (ARMA) (1, 1). In the monitoring phase, in case the features of the question pursue a time series, i.e., ARMA(1,1), on the basis of the maximum likelihood technique, an approach will be developed for the estimation of the stationary state’s change point. To estimate unidentified parameters following the change point, the dynamic linear model’s filtering was utilized on the basis of the singular decomposition of values. The proposed model has wide applications in several fields such as finance, stock exchange marks and rapid production. The results of simulation showed the suggested estimator’s effectiveness. In addition, a real example on stock exchange market is offered to delineate the application.

Keywords

References

1.Safaeipour, A. and Niaki, S.T.A., "Drift change point estimation in multistage processes using mle", International Journal of Reliability, Quality and Safety Engineering, Vol. 22, No. 05, (2015), 1550025.
2. Sturludottir, E., Gunnlaugsdottir, H., Nielsen, O.K. and Stefansson, G., "Detection of a changepoint, a mean-shift accompanied with a trend change, in short time-series with autocorrelation", Communications in Statistics-Simulation and Computation, Vol. 46, No. 7, (2017), 5808-5818.
3. Slama, A. and Saggou, H., "A bayesian analysis of a change in the parameters of autoregressive time series", Communications in Statistics-Simulation and Computation, Vol. 46, No. 9, (2017), 7008-7021.
4. Bodnar, O., "Application of the generalized likelihood ratio test for detecting changes in the mean of multivariate garch processes", Communications in Statistics-Simulation and Computation, Vol. 38, No. 5, (2009), 919-938.
5. Doroudyan, M., Owlia, M.S., Sadeghi, H. and Amiri, A., "Monitoring financial processes with arma-garch model based on shewhart control chart (case study: Tehran stock exchange)", International Journal of Engineering-Transactions B: Applications, Vol. 30, No. 2, (2017), 270-280.
6. Moghadam, R.P., Shahraki, F. and Sadeghi, J., "Online monitoring for industrial processes quality control using time varying parameter model", International Journal of Engineering-Transactions A: Basics, Vol. 31, No. 4, (2018), 524-532.
7. Keramatpour, M., Niaki, S., Khedmati, M. and Soleymanian, M., "Monitoring and change point estimation of ar (1) autocorrelated polynomial profiles", International Journal of Engineering-Transactions C: Aspects, Vol. 26, No. 9, (2013), 933-942.
8. Vakilian, F., Amiri, A. and Sogandi, F., "Isotonic change point estimation in the ar (1) autocorrelated simple linear profiles", International Journal of Engineering-Transactions A: Basics, Vol. 28, No. 7, (2015), 1059-1067.
9. Li, F., Tian, Z. and Qi, P., "Structural change monitoring for random coefficient autoregressive time series", Communications in Statistics-Simulation and Computation, Vol. 44, No. 4, (2015), 996-1009.
10. Chang, S.I., Zhang, Z., Koppel, S., Malmir, B., Kong, X., Tsai, T.-R. and Wang, D., "Retrospective analysis for phase i statistical process control and process capability study using revised sample entropy", Neural Computing and Applications, (2018), 1-14.
11. Ebadi, M., Shahriari, H., Abdollahzadeh, M. and Bahrini, A., "Robust estimation of parameters in multivariate processes", in 2011 IEEE International Conference on Quality and Reliability, IEEE., (2011), 585-589.
12. Nishina, K., "A comparison of control charts from the viewpoint of change‐point estimation", Quality and reliability engineering international, Vol. 8, No. 6, (1992), 537-541.
13. Page, E.S., "Continuous inspection schemes", Biometrika, Vol. 41, No. 1/2, (1954), 100-115.
14. Atashgar, K. and Noorossana, R., "An integrating approach to root cause analysis of a bivariate mean vector with a linear trend disturbance", The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-4, (2011), 407-420.
15. Ahmadzadeh, F., "Change point detection with multivariate control charts by artificial neural network", The International Journal of Advanced Manufacturing Technology, Vol. 97, No. 9-12, (2018), 3179-3190.
16. Noorossana, R., Saghaei, A., Paynabar, K. and Abdi, S., "Identifying the period of a step change in high‐yield processes", Quality and Reliability Engineering International, Vol. 25, No. 7, (2009), 875-883.
17. Pignatiello Jr, J.J. and Samuel, T.R., "Estimation of the change point of a normal process mean in spc applications", Journal of Quality technology, Vol. 33, No. 1, (2001), 82-95.
18. Samuel, T.R., Pignatiello Jr, J.J. and Calvin, J.A., "Identifying the time of a step change with x control charts", Quality Engineering, Vol. 10, No. 3, (1998), 521-527.
19. Samuel, T.R., Pignatiello Jr, J.J. and Calvin, J.A., "Identifying the time of a step change in a normal process variance", Quality Engineering, Vol. 10, No. 3, (1998), 529-538.
20. Daryabari, S.A., Malmir, B. and Amiri, A., "Monitoring bernoulli processes considering measurement errors and learning effect", Quality and Reliability Engineering International, (2019).
21. Perry, M.B., Pignatiello Jr, J.J. and Simpson, J.R., "Estimating the change point of the process fraction non‐conforming with a monotonic change disturbance in spc", Quality and Reliability Engineering International, Vol. 23, No. 3, (2007), 327-339.
22. Noorossana, R. and Shadman, A., "Estimating the change point of a normal process mean with a monotonic change", Quality and Reliability Engineering International, Vol. 25, No. 1, (2009), 79-90.
23. Perry, M.B. and Pignatiello Jr, J.J., "Estimation of the change point of a normal process mean with a linear trend disturbance in spc", Quality Technology & Quantitative Management, Vol. 3, No. 3, (2006), 325-334.
24. Perry, M.B., Pignatiello Jr, J.J. and Simpson, J.R., "Estimating the change point of a poisson rate parameter with a linear trend disturbance", Quality and Reliability Engineering International, Vol. 22, No. 4, (2006), 371-384.
25. Ghazanfari, M., Alaeddini, A., Niaki, S.T.A. and Aryanezhad, M.B., "A clustering approach to identify the time of a step change in shewhart control charts", Quality and Reliability Engineering International, Vol. 24, No. 7, (2008), 765-778.
26. Alaeddini, A., Ghazanfari, M. and Nayeri, M.A., "A hybrid fuzzy-statistical clustering approach for estimating the time of changes in fixed and variable sampling control charts", Information Sciences, Vol. 179, No. 11, (2009), 1769-1784.
27. Amiri, A. and Allahyari, S., "Change point estimation methods for control chart postsignal diagnostics: A literature review", Quality and Reliability Engineering International, Vol. 28, No. 7, (2012), 673-685.
International Journal of Engineering
Volume 32, Issue 5
TRANSACTIONS B: Applications
May 2019
Pages 726-736

Files

Cited by

Share

How to cite

Statistics