1. Rizkalla, H. L. and Abdulwahed, A., “Some mechanical
properties of metalJournal
of
Materials
Processing
Technology,
Vol.
56,
No.
1–4,
(1996),
398–403.
2. Zuhailawati, H. and Samayamutthirian, P., “Fabrication of low
cost of aluminium, matrix composite reinforced with silica
sand”, Journal of Physical Science, Vol. 18, No. 1, (2007), 47–
55.
3. Gregolin, E.N., Goldenstein, H., and Santos, R.G., “Cocontinuous
silica–aluminum composite”, Journal of Materials
Processing Technology, Vol. 157–158, (2004), 688–694.
4. Gregolin, E.N., Goldenstein, H., Gonçalves, M.C., and Santos,
R.G., “Aluminium Matrix Composites Reinforced with Cocontinuous
Interlaced Phases Aluminium-alumina Needles”,
Materials Research, Vol. 5, No. 3, (2002), 337–342.
5. Gregolin, E.N., Button, S.T., Goldenstein, H., and Santos, R.G.,
“Hot Workability And Mechanical Properties Of An AluminumSilica
Composite”,
In AMPT’01 – International Conference on
Advances in Materials and Processing Technologies, Spain,
(2001), 1–5.
6. Wang, J., “Mechanical alloying of amorphous Al–SiO2
powders”, Journal of Alloys and Compounds, Vol. 456, No. 1–
2, (2008), 139–142.
7. Sayuti, M., Sulaiman, S., Vijayaram, T.R., Baharudin, B.T.H.T.,
and Arifi, M.K.A., “Manufacturing and Properties of Quartz
(SiO2) Particulate Reinforced Al-11.8%Si Matrix Composites,”
In: Composites and Their Properties, InTech, (2012), 411–436.
8. Veeresh Kumar, G.B., P. Rao, C.S., Selvaraj, N., and Bhagyashekar, M.S., “Studies on Al6061-SiC and Al7075-Al 2
O 3 Metal Matrix Composites”, Journal of Minerals and
Materials Characterization and Engineering, Vol. 9, No.1,
(2010), 43-55.
9. Hamouda, A.M.S., Sulaiman, S., Vijayaram, T.R., Sayuti, M.,
and Ahmad, M.H.M., “Processing and characterisation of
particulate reinforced aluminium silicon matrix composite”,
Journal of Achievements of Materials and Manufacturing
Engineering, Vol. 25, No. 2, (2007), 11–16.
10. Banerjee, R., Panja, S., and Nandi, M., “An electrochemical and
quantum chemical investigation of some corrosion inhibitors on
aluminium alloy in 0.6 M aqueous sodium chloride solution”,
Indian Journal of Chemical Technology, Vol. 18, No. 4,
(2011), 309–313.
11. Sherif, E.S.M., “Corrosion and Corrosion Inhibition of
Aluminum in Arabian Gulf Seawater and Sodium Chloride
Solutions by 3-Amino-5-Mercapto-1, 2, 4-Triazole”,
International Journal of Electrochemical Science, Vol. 6,
(2011), 1479–1492.
12. Musa, A.Y., Mohamad, A.B., Kadhum, A.A.H., and Chee, E.P.,
“Galvanic Corrosion of Aluminum Alloy (Al2024) and Copper
in 1.0 M Nitric Acid”, International Journal of
Electrochemical Science, Vol. 6, No. 10, (2011), 5052–5065.
13. Sherif, E.S.M. and Park, S.M., “Effects of 1,4-naphthoquinone
on aluminum corrosion in 0.50 M sodium chloride solutions”,
Electrochimica Acta, Vol. 51, No. 7, (2006), 1313–1321.
14. Vrsalović, L., Kliškić, M., and Gudić, S., “Aplication of
Phenolic Acids in the Corrosion Protection of Al- 0.8Mg Alloy
in Chloride Solution”, International Journal of
Electrochemical Science, Vol. 4, (2009), 1568–1582.
15. Liang, C.H. and Zhang, W., “Pitting Corrosion Mechanisms and
Characteristics of Aluminum in Solar Heating Systems”,
Journal of the Chinese Chemical Society, Vol. 53, No. 2,
(2006), 313–318.
16. Bienia, J., Walczak, M., Surowska, B., and Sobczak, J.,
“Microstructure and corrosion behaviour of aluminum fly ash
composites”, Journal of Optoelectronics and Advanced
Materials, Vol. 5, No. 2, (2003), 493–502.
17. Pinto, G.M., Nayak, J., and Shetty, A.N., “Corrosion behaviour
of 6061 Al-15vol. Pct. SiC composite and its base alloy in a
mixture of 1: 1 Hydrochloric and sulphuric acid medium”,
International Journal of Electrochemical Science, Vol. 4, No.
10, (2009), 1452–1468.
18. Escalera-Lozano, R. Gutiérrez, C.A., Pech-Canul, M.A., and
Pech-Canul, M.I., “Corrosion characteristics of hybrid
Al/SiCp/MgAl2O4 composites fabricated with fly ash and
recycled aluminum”, Materials Characterization, Vol. 58, No.
10, (2007), 953–960.
19. Alaneme, K.K. and Bodunrin, M.O., “Corrosion behavior of
alumina reinforced aluminium (6063) metal matrix composites”,
Journal of Minerals and Materials Characterization and
Engineering, Vol. 10, No. 12, (2011), 1153–1165.
20. Sherif, E.S.M., Almajid, A.A., Latif, F.H., and Junaedi, H.,
“Effects of Graphite on the Corrosion Behavior of AluminumGraphite
Composite in Sodium Chloride Solutions”,
International Journal of Electrochemical Science, Vol. 6,
(2011), 1085–1099.
21. Gujarathi, K., “Corrosion of aluminum alloy 2024 belonging to
the 1930s in seawater environment”, Doctoral dissertation,
Texas A&M University, (2008).
22. Szklarska-Smialowska, Z., “Pitting corrosion of aluminum”,
Corrosion Science, Vol. 41, No. 9, (1999), 1743–1767.
23. Kan, H.M, Wang, Z.W., Wang, X.Y., and Zhang, N.,
“Electrochemical deposition of aluminum on W electrode from
AlCl3-NaCl melts”, Transactions of Nonferrous Metals
Society of China, Vol. 20, No. 1, (2010), 158–164.