Instrumentation Readings versus Numerical Analysis of Taham Dam

Authors

1 Department of Civil Engineering, University of Zanjan, Zanjan, Iran

2 Department of Civil Engineering, Zanjan Branch, Islamic Azad University, Zanjan, Iran

Abstract

Dam construction is one of the challenges among large-scale projects of a country. Among different types of dams, due to special features, earth dams are the most kind of dams that were constructed in Iran in the past three decades. Features such as efficiency and stability of earth dams have an important effect on their operation and prevent them to be damaged. Taham dam is clay core dam which is constructed in Zanjan province in Iran. After dam impoundment, the stresses and distribution of pore water pressure of the Taham earth dam were investigated and measured by using the instrumentation installed in dam body. Measured values then compared with the obtained results by numerical analysis of the Dam. For numerical analysis PLAXIS code has been used. This comparison showed that the pore water pressures in the dam is similar with the results of numerical analysis, but the stresses in the dam are lower than results of numerical analysis in most areas of dam.

Keywords


  1. Baecher, G. B., Paté, M. E. and De Neufville, R., "Risk of dam failure in benefitā€cost analysis", Water Resources Research, Vol. 16, No. 3, (1980), 449-456.
  2. Verma, D., Setia, B. and Arora, V., "Experimental study of breaching of an earthen dam using a fuse plug model", International Journal of Engineering, Transactions A: Basics, Vol. 30, No. 4, (2017), 479-485.
  3. Athani, S. S., Solanki, C. and Dodagoudar, G., "Seepage and stability analyses of earth dam using finite element method", Aquatic Procedia, Vol. 4, No., (2015), 876-883.
  4. Marandi, S.M., Safapour, P., Movahed Asl, R. and Bagheripour, M. H., “Earthquake Induced Permanent Displacement of Slopes: A Numerical Study”, International Journal of Engineering, Vol. 18, No. 2, (2005), 187-195.
  5. Noorzaei, J., Mohammadian, E., “Seismic Respose of the Kavar Concrete Face Rockfill Dam”, International Journal of Engineering Transaction B: Applications, Vol. 15, No.4, (2002), 333-346.
  6. Saeedinia, A., Akbari, H., Salemi, I., “ Earth Dam’s precise instruments”, Sepa Sad Engineering Co. publication, (2012).
  7. Rashidi, M., Haeri, S. M., “Evaluation of behaviors of earth and rockfill dams during construction and initial impounding using instrumentation data and numerical modeling”, Journal of Rock Mechanics and Geotechnical Engineering, Vol. 9, No. 4, ( 2017), 709-725.
  8. Mellisakhteman Co., “Report of Installed Tools at Taham Dam”, (2005).
  9. Shoghli, A., Mirghasemi, A. A., Lim. Y.,” Assessing and Evaluating the Operation of Pressure Cells in Embankment Dams: A Case Study of Five Iranian Embankment Dams”, 36th Annual United States Society on Dams conference, Denver, Colorado, April 11-15, (2016).
  10. Vahdati, P., “Identification of soil parameters in an embankment dam by mathematical optimization”, PhD diss.,  Luleå Tekniska Universitet, (2014).
  11. Toufigh, M. M., “Seepage with Nonlinear Permeability by Least Square FEM”, International Journal of Engineering Transaction B, Applications, Vol. 15, No. 2, (2002), 125-134.
  12. Fakhimi, A. A., Moosavi, M. J., “Earthquake Induced Permanent Displacement of lopes, A Numerical Study”, International Journal of Engineering, Vol. 13, No. 4, (2000), 73-80.
  13. Brinkgreve, R. B. J., Kumarswamy, S., Swolfs, W.M. and Foria, F., “Plaxis 2D material models manual”, Plaxis bv, (2018).
  14. Vermeer, P.A. and De Borst, R., "Non-associated plasticity for soils, concrete and rock", Heron, Vol. 29, No. 4, (1984).
  15. Mollaei, R., Mollaei, M., Gheidari, M. H. N., Elahi, H. A., “Evaluation of Gelabar earth dam behavior during construction and first watering by the method of limited components and comparison with real amount resulted by precise instruments data”, European Online Journal of Natural and Social Sciences, Vol. 3, No. 4, (2014), 657-676.