1. Singh, R. P., Pandey, P. M., Behera, Ch., Mridha, A. R. "Effects of rotary ultrasonic bone drilling on cutting force and temperature in the human bones.",
Proceedings of the IMechE, Part H: Journal of Engineering in Medicine, (2020). DOI:
10.1177/0954411920925254
2. Ying, Zh., Shu, L., Sugita, N. "Experimental and Finite Element Analysis of Force and Temperature in Ultrasonic Vibration Assisted Bone Cutting.",
Annals of Biomedical Engineering, Vol. 48, (2020), 1281–1290. DOI: 10.1007/s10439-020-02452-w
3. Shu, L., Li, Sh.,
Terashima, M., Bai, W., Hanami, T., Hasegawa, R., Sugita, N. "A novel self-centring drill bit design for low-trauma bone drilling.", International Journal of Machine Tools and Manufacture, Vol. 154, (2020), 103568, DOI: 10.1016/j.ijmachtools.2020.103568
4. Zhang, A., Bian, C., Zhang, X., Zhang, J., Liu, Z., Zhang, S. "Effect of feed condition on thrust force and torque during continuous and step-by-step drilling of cortical bone.",
Procedia CIRP, Vol. 89, (2020), 201-206. DOI:
10.1016/j.procir.2020.05.143
5. Gupta, V., Singh, R. P., Pandey, P. M., Gupta, R. "In vitro comparison of conventional surgical and rotary ultrasonic bone drilling techniques.",
Proceedings of the IMechE, Part H: Journal of Engineering in Medicine, (2020). DOI:
10.1177/0954411919898301
7. Sarparast, M., Ghoreishi, M., Jahangirpoor, T., Tahmasbi, V. "Modelling and optimisation of temperature and force behaviour in high-speed bone drilling.",
Biotechnology & Biotechnological Equipment, Vol. 33, No. 1, (2019), 1616-1625. DOI:
10.1080/13102818.2019.1684841
8. Alam, K., Piya, S., Al-Ghaithi, A., Silberschmidth, V. "Experimental investigation on the effect of drill quality on the performance of bone drilling.",
Biomedical Engineering, Vol. 65, No. 1, (2019), 113-120. DOI:
10.1515/bmt-2018-0184
9. Zolfaghari, M., Ghoreishi, M., Tahmasbi, V. "Temperature in bone drilling process: Mathematical modeling and Optimization of effective parameters.", International Journal of Engineering, Transactions A: Basics, Vol. 29, No. 7, (2016), 946-953. DOI: 10.5829/idosi.ije.2016.29.07a.09
10. Singh, G.,
Jain, V.,
Gupta, D.,
Sharma, A. "Parametric effect of vibrational drilling on osteonecrosis and comparative histopathology study with conventional drilling of cortical bone.",
Proceedings of the IMechE, Part H: Journal of Engineering in Medicine, Vol. 232, No. 10, (2018), 975-986. DOI:
10.1177/0954411918794983
11. Augustin, G.,
Zigman, T.,
Davila, S.,
Udilljak, T.,
Staroveski, T.,
Brezak, D.,
Babic, S. "Cortical bone drilling and thermal osteonecrosis.",
Clinical Biomechanics (Bristol, Avon), Vol. 27, No. 4, (2011), 313-325. DOI:
10.1016/j.clinbiomech.2011.10.010
12. Pandey, R. K., Panda, S. S. "Evaluation of delamination in drilling of bone.",
Medical Engineering and Physics, Vol. 37, No. 7, (2015), 657-664. DOI:
10.1016/j.medengphy.2015.04.008
13. Tuijthof, G.,
Frühwirt, C.,
Kment, C. "Influence of tool geometry on drilling performance of cortical and trabecular bone.",
Medical Engineering and Physics, Vol. 35, No. 8, (2013), 1165-1172.
14. Singh, G., Jain, V., Gupta, D., Ghai, A. "Optimization of process parameters for drilled hole quality characteristics during cortical bone drilling using Taguchi method.",
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 62, (2016), 355-365. DOI:
10.1016/j.jmbbm.2016.05.015
15. Green, S. A., Dahl, M. T., Intramedullary Limb Lengthening. Gewerbestrasse: Springer International Publishing, 2017.
16. Höller, C., Technical and Economic Analysis of the Process of Surgical Bone Drilling and Improvement Potentials. Master's Theses, Graz University of Technology, 2015.
17. Tahmasbi, V., Ghoreshi, M., Zolfaghari, M. "Temperature in bone drilling process: Mathematical modeling and Optimization of effective parameters.", International Journal of Engineering, Transactions A: Basics, Vol. 29, No. 7, (2016), 946-953. DOI: 10.5829/idosi.ije.2016.29.07a.09
18. Sui, J., Sugita, N. "Experimental Study of Thrust Force and Torque for Drilling Cortical Bone.",
Annals of BiomedicalEngineering, Vol. 47, No. 3, (2019), 802-812. DOI:
10.1007/s10439-018-02196-8
19. Ghoreishi, M., Tahmasbi, V. "Optimization of material removal rate in dry electro-discharge machining process.", Modares Mechanical Engineering, Vol. 14, No. 12, (2015), 113-121.
20. Montgomery, D. C., Design and Analysis of Experiments: Second Edittion. New York: John Wiley & Sons, 2008.
21. Hou, T. H., Su, C. H., Liu, W. L. "Parameters optimization of a nano-particle wet milling process using the Taguchi method, response surface method and genetic algorithm.",
Powder Technology, Vol. 173, No. 3, (2007), 153-162. DOI:
10.1016/j.powtec.2006.11.019
23. Korayem, M. H., Rastegar, Z., Taheri, M. "Sensitivity analysis of nano-contact mechanics models in manipulation of biological cell.",
Nanoscience and Nanotechnology, Vol. 2, No. 3, (2012), 49-56. DOI:
10.5923/j.nn.20120203.02
24. Wang, W., Shi, Y., Yang, N., Yuan, X. "Experimental analysis of drilling process in cortical bone.",
Medical Engineering and Physics, Vol. 36, No. 2, (2014), 261-266. DOI:
10.1016/j.medengphy.2013.08.006
25. Alam, K., Ghodsi, M., Al-Shabibi, A., Silberschmidt, V. "Experimental Study on the Effect of Point Angle on Force and Temperature in Ultrasonically Assisted Bone Drilling.",
Journal of Medical and Biological Engineering, Vol. 38, No. 2, (2018), 236-243. DOI: 10.1007/s40846-017-0291-8
26. Knight, W. A., Boothroyd, G., Fundamentals of metal machining and machine tools. Florida: CRC Press, 2005.
27. Altintas, Y., Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design. Cambridge: Cambridge university press, 2012.
29. Farnworth, G., Burton, J., "Optimization of drill geometry for orthopaedic surgery.", in Proceedings of the Fifteenth International Machine Tool Design and Research Conference 1975. Springer, 10.1007/978-1-349-01986-1_27