1. An, Z., Li, S., Wang, J., Qian, W. and Wu, Q., "An intelligent fault diagnosis approach considering the elimination of the weight matrix multi-correlation",
Applied Sciences, Vol. 8, No. 6, (2018), 906. doi:
10.3390/app8060906
2. Mohammed, O.D., "Dynamic modelling and vibration analysis for gear tooth crack detection", Luleå tekniska universitet, (2015),
3. Singh, J., Darpe, A. and Singh, S., "Bearing damage assessment using jensen-rényi divergence based on eemd",
Mechanical Systems and Signal Processing, Vol. 87, (2017), 307-339. doi:
10.1016/j.ymssp.2016.10.028
4. Wang, Z., Du, W., Wang, J., Zhou, J., Han, X., Zhang, Z. and Huang, L., "Research and application of improved adaptive momeda fault diagnosis method",
Measurement, Vol. 140, (2019), 63-75. doi:
10.1016/j.measurement.2019.03.033
5. Wang, T., Chu, F., Han, Q. and Kong, Y., "Compound faults detection in gearbox via meshing resonance and spectral kurtosis methods",
Journal of Sound and Vibration, Vol. 392, (2017), 367-381. doi:
10.1016/j.jsv.2016.12.041
6. Lei, Y., Han, D., Lin, J. and He, Z., "Planetary gearbox fault diagnosis using an adaptive stochastic resonance method",
Mechanical Systems and Signal Processing, Vol. 38, No. 1, (2013), 113-124. doi:
10.1016/j.ymssp.2012.06.021
7. Wang, S., Chen, X., Cai, G., Chen, B., Li, X. and He, Z., "Matching demodulation transform and synchrosqueezing in time-frequency analysis",
IEEE Transactions on Signal Processing, Vol. 62, No. 1, (2013), 69-84. doi:
10.1109/TSP.2013.2276393
8. Yang, Y., Dong, X., Peng, Z., Zhang, W. and Meng, G., "Vibration signal analysis using parameterized time–frequency
method for features extraction of varying-speed rotary machinery",
Journal of Sound and Vibration, Vol. 335, No., (2015), 350-366. doi:
10.1016/j.jsv.2014.09.025
9. Wang, D., Tsui, K.-L. and Qin, Y., "Optimization of segmentation fragments in empirical wavelet transform and its applications to extracting industrial bearing fault features",
Measurement, Vol. 133, (2019), 328-340. doi:
10.1016/j.measurement.2018.10.018
10. Han, T., Jiang, D., Sun, Y., Wang, N. and Yang, Y., "Intelligent fault diagnosis method for rotating machinery via dictionary learning and sparse representation-based classification",
Measurement, Vol. 118, (2018), 181-193. doi:
10.1016/j.measurement.2018.01.036
11. Ding, X. and He, Q., "Energy-fluctuated multiscale feature learning with deep convnet for intelligent spindle bearing fault diagnosis",
IEEE Transactions on Instrumentation and Measurement, Vol. 66, No. 8, (2017), 1926-1935. doi:
10.1109/TIM.2017.2674738
12. Sait, A.S. and Sharaf-Eldeen, Y.I., A review of gearbox condition monitoring based on vibration analysis techniques diagnostics and prognostics, in Rotating machinery, structural health monitoring, shock and vibration, volume 5. 2011, Springer.307-324.
13. Braun, S., "The synchronous (time domain) average revisited",
Mechanical Systems and Signal Processing, Vol. 25, No. 4, (2011), 1087-1102. doi:
10.1016/j.ymssp.2010.07.016
14. Wan, Z., Cao, H., Zi, Y., He, W. and He, Z., "An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack",
Engineering Failure Analysis, Vol. 42, (2014), 157-177. doi:
10.1016/j.engfailanal.2014.04.005
15. Zhou, Q., Wu, C. and Fan, Q., "Gear fault diagnosis under the run-up condition using fractional fourier transform and hilbert transform", in International Conference on Mechanical Design, Springer., (2019), 918-943. doi: 10.1007/978-981-32-9941-2_77
16. Mohammed, O.D. and Rantatalo, M., Residual signal techniques used for gear fault detection, in Current trends in reliability, availability, maintainability and safety. 2016, Springer.157-163. doi: 10.1007/978-3-319-23597-4_12
17. Rezaei, E., Poursina, M., Rezaei, M. and Ariaei, A., "A new analytical approach for crack modeling in spur gears", Jordan Journal of Mechanical and Industrial Engineering, Vol. 13, No. 2, (2019) 69-74.
18. Rezaei, M., Poursina, M., Jazi, S.H. and Aboutalebi, F.H., "Multi crack detection in helical gear teeth using transmission error ratio",
Journal of Mechanical Science and Technology, Vol. 33, No. 3, (2019), 1115-1121. doi:
10.1007/s12206-019-0111-x
19. Alkhadafe, H., Al-Habaibeh, A. and Lotfi, A., "Condition monitoring of helical gears using automated selection of features and sensors",
Measurement, Vol. 93, (2016), 164-177. doi:
10.1016/j.measurement.2016.07.011
20. Sharma, V. and Parey, A., "A review of gear fault diagnosis using various condition indicators",
Procedia Engineering, Vol. 144, (2016), 253-263. doi:
10.1016/j.proeng.2016.05.131
21. Radu, M., Andrei, L. and Andrei, G., "A perspective on gear meshing quality based on transmission error analysis", in 8TH International Conference on Advanced Concepts in Mechanical Engineering, IOP Publishing. Vol. 444, (2018).